Hey my friends, hope you have been having a good week. Today i have the stock rom/firmware for the Elephone Vowney for you guys. This is a really nice phone that has 32GB of internal storage and 4GB of RAM memory to push its octa core processor running at 2.2GHz, and this phone also has a really nice 21 megapixel rear camera and a 5 megapixel front facing camera.For those of you that are ok with flashing you can go ahead and download the rom/firmware from the link below and install it to your phone.
N.B: Make sure that you are using the correct rom/firmware for your device, this version of the rom/firmware is to be used with the normal version of this phone. Do not flash this rom/firmware to the Lite version of the phone. Device may become dead(unresponsive) if you do.
Stock Rom/Official Firmware: Click Here
Now for those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.
1). Turn off the phone. Make sure the USB is not connected to the computer.
2). Remove the battery and re-insert it again
3). Connect your phone to your USB cable, and allow the drivers to be installed
4). Once that is finished disconnect the USB from the computer.
5). The next step is to run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).
8). Click on "Start all".
9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After you receive a (OK) click Stop and disable any phone.
11). Thats it you now have a new firmware/rom on your phone
Feel free to leave a comment and i will reply to it A.S.A.P
Now for those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.
Instructions:
2). Remove the battery and re-insert it again
3). Connect your phone to your USB cable, and allow the drivers to be installed
4). Once that is finished disconnect the USB from the computer.
5). The next step is to run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).
8). Click on "Start all".
9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After you receive a (OK) click Stop and disable any phone.
11). Thats it you now have a new firmware/rom on your phone
Feel free to leave a comment and i will reply to it A.S.A.P
No comments:
Post a Comment