K-Touch A11 Plus Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the K-Touch A11 Plus for you guys.This is a really nice phone that sports 512MB of internal memory, 128MB RAM memory, a 3 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A11 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the K-Touch A11 for you guys.This is a really nice phone that sports 512MB of internal memory, 128MB RAM memory, a 3 megapixel rear camera, 0.3 megapixel front facing camera and a single-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A10 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the K-Touch A10 for you guys.This is a really nice phone that sports 256MB of internal memory, 128MB RAM memory, a 2 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A9 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the K-Touch A9 for you guys.This is a really nice phone that sports a 3 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V4 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee CTRL V4 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V3 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee CTRL V3 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V2 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee CTRL V2 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 3.15 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V1 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee CTRL V1 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 2 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Pioneer P4 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Pioneer P4 for you guys.This is a really nice phone that sports 8GB of internal memory, 1GB RAM memory, a 5 megapixel rear camera, 2 megapixel front facing camera and a quad-core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Pioneer P3 Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the Gionee Pioneer P3 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, 0.3 megapixel front facing camera and a quad-core Cortex-A7 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Pioneer P2 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Pioneer P2 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a dual-core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Pioneer P1 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Pioneer P1 for you guys.This is a really nice phone that sports 512MB of internal memory, 256MB RAM memory, a 2 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Marathon M3 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee Marathon M3 for you guys.This is a really nice phone that sports 8GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a hexa-core Mali-450 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee M2 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee M2 for you guys.This is a really nice phone that sports 4GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a hexa-core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Gpad G5 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Gpad G5 for you guys.This is a really nice phone that sports 8GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a hexa-core Cortex-A7 processor running at 1.5GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Gpad G4 Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the Gionee Gpad G4 for you guys.This is a really nice phone that sports 16GB of internal memory, 1GB RAM memory, a 13 megapixel rear camera, 5 megapixel front facing camera and a quad core Cortex-A7 processor running at 1.5GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Gpad G3 Stock Rom/Official Firmware

Hey guys friends today i have the stock rom/firmware for the Gionee Gpad G3 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a quad core Cortex-A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Gpad G2 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Gpad G2 for you guys.This is a really nice phone that sports 4GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a quad core Cortex-A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Gpad G1 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee Gpad G1 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 8 megapixel rear camera, VGA front facing camera and a dual core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Elife E7 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Elife E7 for you guys.This is a really nice phone that sports 32/16GB of internal memory, 3/2GB RAM memory, a 16 megapixel rear camera, 8 megapixel front facing camera and a quad core Krait 400 processor running at 2.5GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Elife E6 Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the Gionee Elife E6 for you guys.This is a really nice phone that sports 32GB of internal memory, 2GB RAM memory, a 13 megapixel rear camera, 5 megapixel front facing camera and a quad core Cortex A7 processor running at 1.5GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Elife E5 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee Elife E5 for you guys.This is a really nice phone that sports 16GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 5 megapixel front facing camera and a quad core Cortex A7 processor running at 1.5GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Elife E3 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee Elife E3 for you guys.This is a really nice phone that sports 16GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a quad core Cortex A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee Dream D1 Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the Gionee Dream D1 for you guys.This is a really nice phone that sports 4GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 1 megapixel front facing camera and a quad core Cortex A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Neo XL N110U Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Blu Neo XL N110U for you guys.This is a really nice phone that sports 8GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 5 megapixel front facing camera and a quad core MediaTek MT6580 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P