How To Use SP Flash Tool To Flash Rom/Firmware To A phone Or Tablet

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only or firmware upgrade if you are upgrading your phone and then click download with green arrow above it.

• Now connect the phone to the computer via usb without the battery, if the battery cannot be removed make sure the device is turned off completely before you connect it to the device to the usb cable.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone.