Hey peeps today i have the stock rom/firmware for the Blu TouchBook G7 P240 for you guys. This rom/firmware is android 4.4 which is android Kitkat. This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 2 megapixel rear camera and a VGA front facing camera and a dual core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.
For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.
Instructions:
- Download the rom and create a new folder and extract it there.
- Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.
- Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.
- The next step is to set the program to download only and then click download with green arrow above it.
- Now connect the phone via usb without the battery.
- Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)
- When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone.
Feel free to leave comments i will reply to them A.S.A.P
No carga la pagina areglenlo por fa
ReplyDeleteMuy bueno, parecen ser los unicos aparte de @egoismoGSM@ que lo tienen.
ReplyDeleteSe les agradece.
i have tried all the skills i know of but the sp flash tool keeps giving me error messages. does it take long to flash? mine is about an hour and then i get timed out message.
ReplyDeleteIt works! Thank you.
ReplyDeleteNote that this tablet/phone has internal battery, so instead of pulling out your battery you should power off your phone.
And then connect it to the computer, the process should start within a few seconds.
If it doesn't, make sure you have the drivers installed correctly. If you are using Windows 10, lookup how to install them, you may have to do some steps before doing it.
This comment has been removed by the author.
ReplyDeleteFunciona! Gracias.
ReplyDeleteEsta tablet tiene batería interna, entonces en vez de quitarla, hay que apagarla y despues conectarla a tu computadora. Debería comenzar el proceso en unos pocos segundos.
Si no comienza, asegurate que estan instalados correctamente los drivers o reinstalalos.
Si usas Windows 10, es probable que tengas que hacer unos pasos extra para instalarlos. Hay muchos videos de youtube que explican como hacerlo.
el que ya lo haya usado me puede decir si esta bien la rom en todos los aspectos? touch conexiones todos eso
ReplyDelete