Hi my friends today i have the stock rom/official firmware for the Elephone P2000 for you guys. this is the latest rom/firmware released by the manufacturer of this phone. This phone comes with a octa-core processor running at 1.7GHz, 2GB RAM memory, 16GB of internal storage, 13 megapixel rear camera and a 8 megapixel front facing camera. OK now for all of you that are comfortable with flashing you can go ahead and download the rom/firmware from the link below and install it onto your phone.
Stock Rom/Official Firmware: Click Here
Now for those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.
1). Turn off the phone. Make sure the USB is not connected to the computer.
2). Remove the battery and re-insert it again
3). Connect your phone to your USB cable, and allow the drivers to be installed
4). Once that is finished disconnect the USB from the computer.
5). The next step is to run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).
8). Click on "Start all".
9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After you receive a (OK) click Stop and disable any phone.
11). Thats it you now have a new firmware/rom on your phone
Feel free to leave a comment and i will reply to it A.S.A.P
Now for those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.
Instructions:
2). Remove the battery and re-insert it again
3). Connect your phone to your USB cable, and allow the drivers to be installed
4). Once that is finished disconnect the USB from the computer.
5). The next step is to run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).
8). Click on "Start all".
9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After you receive a (OK) click Stop and disable any phone.
11). Thats it you now have a new firmware/rom on your phone
Feel free to leave a comment and i will reply to it A.S.A.P
No comments:
Post a Comment