SKY 4.5LM Stock Rom/Official Firmware

hey guys today i have for you the stock rom/firmware for the SKY 4.5LM. This is the latest release from the manufactures of this phone. This rom/firmware has android 5.1 which is android Kitkat, and this the most popular android at the moment. This phone comes with a 4.5 inches display, 5 megapixel rear camera, 4GB internal memory and 512MB RAM. For those of you that are professionals at flashing you can go ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

Flash Tool: Click Here

For those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download the rom and create a new folder and extract it there.

• Turn off the smartphone. Make sure it is not connected to the computer.

•  Take out the battery and insert it back.

•  connect the phone to a computer cable. The operating system will detect a new device 

• disconnect the phone from the computer.

• Run the program SPMultiPortFlashDownloadProject.

• Choose the menu Factory database -> Setup data source file and choose file MTK_DATABASE.mdb (it is in the folder SP_MDT).

• Choose the menu File -> Open Download Agent File and choose file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

•  Click Scatter File and select the file scatter_emmc.txt

• Choose the type of the rear and front cameras and the type of display controllers that fit your device, using the installation of sensors.

• It's okay if you make a mistake in these parameters. Need to flash again with different settings.

•  Click "Start all".

•  Quickly connect your phone to a computer through usb cable. 

• The program should see it and start flashing. 

• If the phone is not detected, then unplug it from the computer, remove and insert the battery and re-connect to the computer.

•  After the end of the flashing click Stop all and disable the phone.

Feel free to leave comments i will reply to them A.S.A.P

X-BO O1 Stock Rom/Official Firmware

Hey my friends today i am offering you guys the stock rom/firmware for the X-BO O1 smartphone. This rom/firmware is android 5.1 which is Lollipop. This phone comes with a 6 inch LED display, 8GB of internal memory, 8 megapixel rear camera and a 64bit quad core processor. Those are some amazing features and this phone is sold for a meager 100(US) dollars. This is a really nice cost effective phone that can be purchased for any member of your family and they would love it. The rom/firmware that i have for you guys today can be downloaded from the link below.

Stock Rom/Official Firmware: Click Here

Flash Tool: Click Here

For those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download the rom and create a new folder and extract it there.

• Turn off the smartphone. Make sure it is not connected to the computer.

•  Take out the battery and insert it back.

•  connect the phone to a computer cable. The operating system will detect a new device 

• disconnect the phone from the computer.

• Run the program SPMultiPortFlashDownloadProject.

• Choose the menu Factory database -> Setup data source file and choose file MTK_DATABASE.mdb (it is in the folder SP_MDT).

• Choose the menu File -> Open Download Agent File and choose file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

•  Click Scatter File and select the file scatter_emmc.txt

• Choose the type of the rear and front cameras and the type of display controllers that fit your device, using the installation of sensors.

• It's okay if you make a mistake in these parameters. Need to flash again with different settings.

•  Click "Start all".

•  Quickly connect your phone to a computer through usb cable. 

• The program should see it and start flashing. 

• If the phone is not detected, then unplug it from the computer, remove and insert the battery and re-connect to the computer.

•  After the end of the flashing click Stop all and disable the phone.

Feel free to leave comments i will reply to them A.S.A.P

HUAWEI MediaPad X2 GEM-703L Stock Rom/Official Firmware

Hi peeps me again with a really nice stock rom/firmware, today the rom/firmware i have for you is for the Huawei MediaPad X2 GEM-703L. This is a very cool smartphone that has alot of cool features that can make this phone stand out against others in its class. The Huawei MediaPad X2 GEM-703L firmware/rom comes with android 5.1 which is android Kitkat. The rom/firmware for this device can be found at the link below. If you are comfortable with flashing you can go right ahead and download the firmware/rom and install it on your device.

Stock Rom/Official Firmware: Click Here

For those of you that are new to flashing and is wondering how the heck am i going to flash this rom/firmware to my phone, then you can follow the step by step instructions on a pdf file named (GEM-703L SD卡升级指导书.pdf). This pdf file is found in the same rar file that the firmware is in.

Feel free to leave a comment and i will reply to you A.S.A.P

Samsung Galaxy S Duos 3 [SM-G313HU] Stock Rom/Official Firmware

Hey my friends today i have for you the stock rom/firmware for the Samsung Galaxy S Duos 3 SM-G313HU. This is the latest update released for this phone and this rom/firmware is android 4.4.2 which is android Kitkat. This phone was released from 2014 so i know most of you out there would like to upgrade/update to a later version firmware, so here it is. For those of you that are professionals at flashing phones you can go right ahead and download the rom/firmware from the link below and install it to your phone, for those of you that are new to flashing you can follow my step by step instructions on how to flash this rom/firmware to your phone.

Stock Rom/Official Firmware: Click Here

Odin3_v3.10.7: Click Here

Flashing Instructions:

• Turn on USB debugging to do this go to settings and then about and tap on build number 7 times or until you see it says "you are now a developer" and then press back and go into developer options an turn on usb debugging

• Download and extract odin and the flash file for your phone

• Open odin and make sure auto reboot and F. reset time are checked (make sure re-partition is not checked)

• Click on AP and select your extracted firmware/rom

• Then put your phone in download mode by turning it off and pressing volume down+home+power buttons and when you get a menu with a android press volume up to continue 

• Next is to connect your phone to your computer and press start in odin and wait for the process to finish

Thats it feel free to leave a comment and i will reply to you A.S.A.P

Motorola Moto G XT1543 [3rd Gen] Stock Rom/Official Firmware

Hey my friends, hope you have been having a good week. Today i have the stock rom/firmware for the Motorola Moto G XT1543 3RD generation. This rom/firmware is the latest version released by Motorola, and this rom/firmware is also android 6.0 which is Marshmallow. This is the OTA update so you have to install this rom/firmware from the recovery of your phone, i will have instructions on how to install this rom/firmware below. The download link is also found below.

Stock Rom/Official Firmware: Click Here

Installation Instructions:

• Download the OTA update from the link above and rename it as ‘update.zip’.

• Then put the update.zip on the root of your micro SD card

• The turn off your phone and reboot into the bootloader by holding Vol down + Power buttons

• From the bootloader menu, enter recovery mode by holding the Power button and press Volume up when you see ‘no command’

• When you enter recovery mode, select ‘apply update from sd’, and choose the update.zip package and confirm its installation.

• And thats it you now have a new rom/firmware installed on your phone

Feel free to leave a comment and i will reply to you A.S.A.P

df91af9087bcc12c2184a23b354c6c4de16a6a12180913521f

ZTE Blade A430 Stock Rom/Official Firmware

Hey peeps, its me again with a really nice rom/firmware for you guys, Today i have the rom/firmware for the ZTE Blade A430, this rom/firmware is android 4.4.4 which is android Kitkat. And this rom/firmware is the latest version released by ZTE themselves. This rom/firmware can easily be installed to your phone in a matter of minutes and its so easy that anyone who knows how to enter recovery mode can do it. With that said lets begin, the first thing you are going to need to do is download the rom/firmware. A link to the rom can be found at the link below, By the way there are two versions to this phone there is the Blade Fit 4G(Australia) and the Qlux 4G(India).

ZTE Blade Fit 4G: Click Here

ZTE Blade Qlux 4G: Click Here

As i said earlier this rom/firmware is easy to install all you have to do is:

• download the rom/firmware

• place the downloaded rom/firmware on the root of you external SD card and rename it update.zip (if the name is not update)

• reboot your phone in Recovery mode and back up your data

• Then navigate to "apply update from SD card" and select the file you downloaded and placed on your SD card

• wait for it to finish install, once its completed reboot your phone to normal mode and enjoy your new rom/firmware on your phone

Feel free to leave a comment and i will reply to it A.S.A.P

Sony Ericsson Xperia Z C6602 And Xperia Z LTE C6603 Stock Rom/Official Firmware

Hi guys today i have for you guys the stock rom/firmware for both the Sony Ericsson Xperia Z C6602 And Xperia Z LTE C6603. This is the latest rom/firmware release for these devices, it comes with android 5.1.1 which is android Lollipop. This rom/firmware is kind of a tricky one to install, so i have done some research and found a detailed thread on xda on how to install roms/firmware's with the special tool used for Sony Ericsson phones, a link to these instructions will be placed below. Ok guys so once your ready you can go ahead and download the files required, the links to the downloads can be found below.

Xperia Z C6602 Stock Rom/Official Firmware: Click Here

Xperia Z LTE C6603 Stock Rom/Official Firmware: Click Here

Flash tool: Click Here

Instructions: Click Here

Hope everything goes well, you can leave a comment below and i will reply to it A.S.A.P

Samsung Galaxy S6 Edge Stock Rom/Official Firmware [SM-G925L, SM-G925P, SM-G925R4, SM-G925S, SM-G925T]

Hey guys today i have the stock rom/firmware for the Samsung Galaxy S6 Edge [SM-G925L, SM-G925P, SM-G925R4, SM-G925S, SM-G925T]. These 5 roms/firmware's that i offer you guys today is straight from Samsung so they are not tampered with and are the latest version of android that is released for these phones, which is android 5.1.1 Lollipop. The Samsung Galaxy S6 Edge has a lot of really cool features that i am sure u already know about because this phone was one of the most anticipated phones of the year 2015. Ok so if your comfortable flashing your phone, then you can go right ahead and download the stock rom/firmware and the flash tools from the link below and install to your phone.

Odin3_v3.10.7: Click Here

Stock Rom/Official Firmware for SM-G925L: Click Here

Stock Rom/Official Firmware for SM-G925P: Click Here

Stock Rom/Official Firmware for SM-G925R4: Click Here

Stock Rom/Official Firmware for SM-G925S: Click Here

Stock Rom/Official Firmware for SM-G925T: Click Here

OK now if your new to flashing phones you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download and extract odin and the flash file for your phone

• Open odin and click on PDA and select the flash file for your phone (make sure re-partition is not ticked)

• Put your phone in download mode and connect it to your computer via the USB cable (How to put sgh s6 edge in download mode)

• Next click start and wait for the process to finish

And thats it you now have a brand new rom/firmware installed on your phone. Feel free to leave a comment and i will reply to them A.S.A.P

How to Root Avvio Q779 (Digicel)

Good day to you my friend, today i will be showing you how to root your Avvio Q779 smartphone. First let me explain to you what having root access can do for you. Ok so if you decide to go through the process of rooting your phone you will have numerous benefits like:

• Having the option to delete system apps
• controlling cpu temperature
• longer battery life 
• unlocks hidden apps
• boost phone speed
• block ads in any app
• allows for install of custom rom/firmware

So in other words rooting your phone will give you full control of your phone, which is truly what everybody wants. If you want to have this, you have to download the apps required for you to gain root access. The apps required can be downloaded from the link below.

360 Root: Click Here

Busybox: Click Here

Once those are downloaded you can follow my instructions below on how to use both of these apps to gain root access on you phone.

Instructions:

• Place the apks on your SD card 
• turn on unknown sources and install both apps
• next connect to WiFi or use data and open 360 root and click root which has a lock beside it
• Once the phone is rooted now you have to open busybox and grant superuser permissions 
• next you have to click install and click on smart install, if that does not work then click on normal install
• and thats it you now have a android phone with full root privileges 

Feel free to leave a comment i will get back to you A.S.A.P

Avvio Q779 Stock Rom/Official Firmware

Hey my friends i trust its been going good. Today i have for you guys the Stock rom/firmware for the Avvio Q779. This rom/firmware is the latest version release for this phone, it comes with android 4.4.2 Kitkat. This version of the rom/firmware is from Digicel which is one of the largest communications provider in the Caribbean. If you are comfortable with flashing phones you can go right ahead and download the rom/firmware and install it to your phone. A link to the rom/firmware and the drivers needed can be found at the link below.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

Now for those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and thats it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

CyanogenMod 13 For The ZTE Nubia Z7 Max

Hi peeps to day i have for you the CyanogenMod 13 for the ZTE Nubia Z7 Max. This is the latest Rom/firmware release from the developers over at CyanogenMod. They have been working really hard so we can have this rom/firmware, the rom/firmware is an amazing android 6.0 which is Marshmallow for all of you that did not know. This build of the CyanogenMod is really cool because it comes with an amazing feature called multi-window. This feature allows you to run two apps on your phone at the same time, which is really useful for those of you that love to multitask. To get access to this feature you have to have developer options turned on and enable multi-window mode. A link to the rom/firmware and to a few baseband files for this phone is located below, if your comfortable with flashing you can go right ahead and download and install the rom to yuor phone.

CyanogenMod 13.0 + NubiaCamera: Click Here

Baseband Files: Click Here

Gapps: Click Here

For those of you that are new to flashing you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:     (Phone must be rooted)

• Download the rom/firmware and the gapps and place them on the Root of your SD card

• Reboot your phone into your custom recovery

• Once you are there you need to make a back up of your current rom/firmware just in case you get any errors when install the rom/firmware on your phone

• The next step is to factory reset and wipe cache partition

• Then you have to install the rom/firmware

• The next step is to install the gapps

• Once you have completed all of that reboot your device

There you go guys you now have a brand new rom/firmware with android 6.0 Marshmellow. Feel free to leave a comment i will reply to them A.S.A.P

Avvio Q770 Stock Rom/Official Firmware {Digicel}

Hi my friends good day to you, today i have for you guys the stock rom/firmware for the Avvio Q770. This is the official release for this phone, the android version is 5.1 Lollipop. This is a really nice phone and today i will be giving you the latest release for this model phone. If your comfortable with flashing your phone you can go ahead and download the files required From the links below, and i will provide instructions on how to install this rom/firmware to your phone below the links.

Stock Rom/Official Firmware: Click Here

SPMultiPortFlashDownloadProject: Click Here

MTK Preloader Drivers: Click Here

Instructions:

1). Turn off the phone. Make sure the USB is not connected to the computer.

2). Remove the battery and re-insert it again

3). Connect your phone to your USB cable, and allow the drivers to be installed

4). Once that is finished disconnect the USB from the computer.

5). The next step is to run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).

8). Click on "Start all".

9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After you receive a (OK) click Stop and disable any phone.


11). Thats it you now have a new firmware/rom on your phone 

Feel free to leave a comment and i will reply to it A.S.A.P

LG H222G Stock Rom/Official Firmware

Hey guys today i have for you the stock rom/official firmware for the LG H222G. This rom/firmware is the latest for this phone and sports android 4.4.2 Kitkat. This is a really cool phone because it has a really cool feature which LG has been integrating in their newer phones. The feature is called the knocks code, this feature allows you to wake your phone by just tapping on the screen. This is great news for all of you that love to abuse your power button, so now your power button can last longer. Anyways lets get back to the important things, ok so if your comfortable with flashing you can go right ahead and download the rom/firmware and flash it to you phone. The rom/firmware can be found at the link below.

Stock Rom/Official Firmware: Click Here
LG Flash Tool: Click Here

Now for all of you that are new to flashing you can follow my step by step instructions on how to flash this rom/firmware to your phone.

Instructions

• Put your phone in download mode by turning it off and hold volume up then insert the USB cable

• open LG flash tool and click on "select file KDZ" and select the rom/firmware that you downloaded from here

• you will get a new window you will have to click ok and wait for the installation to finish 

If you get any errors disconnect your phone and perform a hard reset and start again.

Feel free to leave comments i will reply to them A.S.A.P

ZTE Blade L2 Plus Stock Rom/Official Firmware

Hi good day to you my friends, today i have the stock rom/official firmware for the ZTE Blade L2 Plus. This rom/firmware comes with android 4.4.1 Kitkat. This phone also comes with a 5.0 megapixel camera which is excellent for recording videos. And also has a really nice 1.3GHz ARM Cortex A7 processor and 1GB of RAM memory. Now for all of you guys searching for the rom/firmware for this phone it can be found at the link below, if you comfortable with flashing your phone you can go right ahead and download the rom/firmware from the link and install it to your phone.

Stock Rom/Official Firmware: Click Here

Drivers: Click Here

OK guys now if your new to flashing phones you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

BLU Aria II T179 Stock Rom/Official Firmware

Hey peeps me again with a extremely rare rom/firmware for you guys. This is the rom/firmware for the BLU Aria II T179. This phone comes with a 0.3 megapixel camera which is not much but at-least you have a camera that you can use to take your photo's. This phone also comes with FM radio and this is a really cool feature if you are like me and actually still listen to radio. This Blu also comes with a SD card slot which can support up to a 32GB SD card. This phone is not much and does not offer alot of features but at the price that this phone is selling for it is worth every penny. Now for those of you that are a searching for the stock rom/firmware for this phone, then look no further the stock rom/official firmware for this phone can be found at the link below.

Stock Rom/Official Firmware: Click Here

ZTE Blade L2 Stock Rom/Official Firmware

Good day my friend i hope your doing ok, today i have the stock rom/firmware for the ZTE Blade L2. This is a cheap phone made mostly of plastic and it has a really nice 5 megapixel camera and comes with 4 gigabytes of internal memory. The stock rom/firmware for this phone is android 4.4.2 Kitkat and is very easy to install. OK so for you to install this rom/firmware to your phone you are going to have to download the required file, which can be found at the link below. 

Stock Rom/Official Firmware: Click Here

OK guys so once you have that downloaded the rest of the process is quite easy, all you have to do is follow the steps below and you will have a new stock rom/firmware on your ZTE Blade L2.

Instructions

• First thing you have to do is place the update.zip that you downloaded on the root of your SD card

• Next is to place the SD card in the phone and boot into the phone's recovery mode

• Then you have to wipe the cache partition 

• Then wipe user data/factory reset

• Once that has completed the next step is to select the option to apply update from SD card and navigate to where you put the rom/firmware, select the update.zip and install it

• Once the installation has completed thats it, you now have a brand new rom/firmware on your phone, now all you have to do is reboot the device and enjoy your rom/firmware

Feel free to leave comments i will reply to them A.S.A.P

BLU DASH JR 4.0 K D143K Stock Rom/Official Firmware

Hey my fellow phone flasher toady i have the stock rom/firmware for the BLU DASH JR 4.0 K D143K. This is the latest rom/firmware release for this particular BLU model, the android version is 4.4.2 Kitkat. This is a  low budget phone that anyone that is not too tech savvy will love, because of its sleek design and easy to use user interface. If you have experience flashing phones then you can go right ahead and download and install the rom/firmware to your phone. A link to the rom/firmware download can be found below.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For all of you out there that have never flashed a phone before or those that are new to flashing, you can get step by step instructions on how to flash this rom/firmware to you phone from below.

Instructions

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Studio 5.0 Ce D536 Stock Rom/Official Firmware

Hi peeps, me again with another rom for you guys. Today we will be talking about the stock rom/official firmware for the Blu Studio 5.0 Ce D536. This is a really nice phone, it does not cost alot to own 1 of these phones. This phone also comes with a 3.12 megapixel rear camera and a VGA front facing camera. This phone also comes with android 4.4.2 kitkat, as its stock operating system and that is what you will get when you download the rom/firmware from here. If your comfortable with flashing you can go right ahead and download the rom/firmware from the link below.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

Now if your new to flashing or you just want to make sure your doing the right thing, you can follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Studio 6.0 LTE Y650q Stock Rom/Official Firmware

Good day to you my friend, i have here for you the stock rom/official firmware for the Blu Studio 6.0 LTE Y650q. This phone has a 13 megapixel rear (primary) camera, which will produce high quality photos. Its 5 megapixel front camera makes it a good selfie phone. It can capture 1080p high definition video with its primary camera, which is second only to 4K in terms of recording quality. Because its screen is over 5.3 inches, this phone also qualifies as a phablet. This also means that for most users, the phone will be difficult to use with one hand when compared to phones with smaller screens.The screen has a resolution of 1,920 pixels by 1,080 pixels, making it a 1080p HD screen. Screen sharpness can be measured in the density of pixels per square inch of screen, and at 367 PPI, it's 1.5 times sharper than an average screen. Now for those of you that are comfortable with flashing, you can go right ahead and download the stock rom/firmware and install it to you phone. The  to the rom/firmware download  can be found at the link below.

Stock Rom/Official Firmware: Click Here