SKY Devices Fuego 5.0D Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the SKY Devices Fuego 5.0D for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a 2 Megapixel front facing camera and a dual core processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

SKY Devices Elite 5.0L Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the SKY Devices Elite 5.0L for you guys.This is a really nice phone that supports 8GB of internal memory, 1GB RAM memory, 13 Megapixel rear camera, a 5 Megapixel front facing camera and a quad core processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

SKY Devices Fuego 4.0L Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the SKY Devices Fuego 4.0L for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a 1.3 Megapixel front facing camera and a dual core processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

SKY Devices Fuego 4.0 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the SKY Devices Fuego 4.0 for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a 1.3 Megapixel front facing camera and a dual core processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

SKY Devices Fuego 4.0D Stock Rom/official Firmware

Hey guys today i have the stock rom/firmware for the SKY Devices Fuego 4.0D for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a 1.3 Megapixel front facing camera and a dual core processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

Blu Advance 4.0 L2 A030L Stock Rom/Official Firmware

Hi my friend today i have the stock rom/firmware for the Blu Advance 4.0 L2 A030L for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 3.15 Megapixel rear camera, a VGA front facing camera and a quad core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

Blu Advance 4.0 L2 A030U Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Blu Advance 4.0 L2 A030U for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 3.15 Megapixel rear camera, a VGA front facing camera and a quad core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

SP Flash Tool: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions on how to flash this rom/firmware to your phone from here: Flash Tool Instructions


Feel free to leave comments i will reply to them A.S.A.P

How To Use SP Flash Tool To Flash Rom/Firmware To A phone Or Tablet

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only or firmware upgrade if you are upgrading your phone and then click download with green arrow above it.

• Now connect the phone to the computer via usb without the battery, if the battery cannot be removed make sure the device is turned off completely before you connect it to the device to the usb cable.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Blu Dash 3.2 D150 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Blu Dash 3.2 D150 for you guys.This is a really nice phone that supports 512MB of internal memory, 256MB ram memory, a 1.3 megapixel rear camera and a dual core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Lenovo A319 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Lenovo A319 for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a 2 megapixel front facing camera and a dual core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: A319_ROW_DS_S312_150330

                                           or

                                          A319_ROW_DS_S308_150115

                                           or

                                           A319_ROW_DS_S305_141125

                                           or

                                           A319_ROW_DS_S234_141018

                                           or

                                           A319_ROW_DS_S232_140926

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Xtouch X5 3G Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Xtouch X5 3G for you guys.This is a really nice phone that supports 16GB of internal memory, 1GB RAM memory, 13 Megapixel rear camera, a 5 megapixel front facing camera and a octa-core Cortex-A7 processor running at 1.4GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

This is an OTA update and can be installed by going into settings and then clicking about phone and then clicking software update, or you can reboot the phone in recovery mode and wipe the data and then select "apply update from SD card" and then navigate to where you saved the rom/firmware and select it and wait for it to be installed.

HTC Desire 320 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the HTC Desire 320 for you guys.This is a really nice phone that supports 8GB of internal memory, 1GB RAM memory, 8 Megapixel rear camera, a VGA front facing camera and a quad core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

HTC Desire 210 Dual Sim Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the HTC Desire 210 Dual Sim for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a VGA front facing camera and a dual core Cortex-A7 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

HTC Desire 310W Dual Sim Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the HTC Desire 310W Dual Sim for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 5 Megapixel rear camera, a VGA front facing camera and a quad core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Touchbook M7 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/official firmware for the Blu Touchbook M7 for you guys. This tablet comes with 512MB internal storage, 512MB RAM memory, a 800MHz ARM 11 processor, a 3.15 megapixel rear camera and a VGA front facing camera. For all those of you that are comfortable with flashing you can go ahead and download the rom/firmware from the link below and install it onto your phone.

Stock Rom/Official Firmware: Click Here

SPMultiPortFlashDownloadProject: Click Here

MTK Preloader Drivers: Click Here

Now for those of you that are new to flashing you can follow my step  by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

1). Turn off the phone. Make sure the USB is not connected to the computer.

2). Remove the battery and re-insert it again

3). Connect your phone to your USB cable, and allow the drivers to be installed

4). Once that is finished disconnect the USB from the computer.

5). The next step is to run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).

8). Click on "Start all".

9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After you receive a (OK) click Stop and disable any phone.

11). Thats it you now have a new firmware/rom on your phone 




Feel free to leave a comment and i will reply to it A.S.A.P

VeryKool S4010 Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the VeryKool S4010 for you guys.This is a really nice phone that supports 4GB of internal memory, 512MB RAM memory, 8 Megapixel rear camera and a dual core Cortex-A7 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Neo X LTE Stock Rom/Official Firmware

Hey guys today i have the stock rom/official firmware for the Blu Neo X LTE for you guys. For all those of you that are comfortable with flashing you can go ahead and download the rom/firmware from the link below and install it onto your phone.

Stock Rom/Official Firmware: Click Here

SPMultiPortFlashDownloadProject: Click Here

MTK Preloader Drivers: Click Here

Now for those of you that are new to flashing you can follow my step  by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

1). Turn off the phone. Make sure the USB is not connected to the computer.

2). Remove the battery and re-insert it again

3). Connect your phone to your USB cable, and allow the drivers to be installed

4). Once that is finished disconnect the USB from the computer.

5). The next step is to run SPMultiPortFlashDownloadProject.exe

6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).

7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder that contains the rom/firmware).

8). Click on "Start all".

9). Then connect your phone to your USB cable. The program should recognize the phone and blink. If the phone is not detected, then unplug it from the computer,
 remove and insert the battery (if the battery is removable) and reconnect it to the computer.

10). After you receive a (OK) click Stop and disable any phone.

11). Thats it you now have a new firmware/rom on your phone 




Feel free to leave a comment and i will reply to it A.S.A.P

Blu Dash 3.5 II Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Blu Dash 3.5 II for you guys.This is a really awesome phone that supports 470MB of internal memory and a dual core MediaTek ARM MT6572 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Blu Energy X E010Q Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Blu Energy X E010Q for you guys.This is a really awesome phone that supports 8GB of internal memory, 1GB RAM memory, a 8 megapixel rear camera, 2 megapixel front facing camera and a quad core Cortex-A7 processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A11 Plus Stock Rom/Official Firmware

Hi my friends today i have the stock rom/firmware for the K-Touch A11 Plus for you guys.This is a really nice phone that sports 512MB of internal memory, 128MB RAM memory, a 3 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A11 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the K-Touch A11 for you guys.This is a really nice phone that sports 512MB of internal memory, 128MB RAM memory, a 3 megapixel rear camera, 0.3 megapixel front facing camera and a single-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A10 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the K-Touch A10 for you guys.This is a really nice phone that sports 256MB of internal memory, 128MB RAM memory, a 2 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

K-Touch A9 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the K-Touch A9 for you guys.This is a really nice phone that sports a 3 megapixel rear camera, 0.3 megapixel front facing camera and a dual-core processor running at 1.3GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V4 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee CTRL V4 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A7 processor running at 1.2GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V3 Stock Rom/Official Firmware

Hey peeps today i have the stock rom/firmware for the Gionee CTRL V3 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 5 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V2 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee CTRL V2 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 3.15 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P

Gionee CTRL V1 Stock Rom/Official Firmware

Hey guys today i have the stock rom/firmware for the Gionee CTRL V1 for you guys.This is a really nice phone that sports 4GB of internal memory, 512MB RAM memory, a 2 megapixel rear camera, VGA front facing camera and a quad-core Cortex-A9 processor running at 1GHz. If you comfortable with Flashing You can right ahead and download the rom/firmware from the link below and install it on your phone.

Stock Rom/Official Firmware: Click Here

MTK Preloader Drivers: Click Here

For those of you that are new to flashing phones you can go ahead and follow my step by step instructions below on how to flash this rom/firmware to your phone.

Instructions:

• Download the rom and create a new folder and extract it there.

• Next is to open SP Flash Tool......If you dont have sp flash tool you can download it here.

• Then you have to click on scatter loading and navigate to the folder where you extracted the rom, you will see a scatter.txt file click on it and click open.

• The next step is to set the program to download only and then click download with green arrow above it.

• Now connect the phone via usb without the battery.

• Then put the battery back in and wait for the program to flash the rom to the phone (DO NOT INTERRUPT THIS PROCESS AND DO NOT TRY TO TURN ON PHONE WHILE THE PROGRAM IS STILL RUNNING)

• When the process is complete you will see a white tick in a green circle, now you can disconnect your phone and that is it you now have a brand new firmware installed on your phone. 

Feel free to leave comments i will reply to them A.S.A.P